Blom Convert / Knowledge base
Floor plan conversion wiki
From raster plans and PDFs to editable CAD. Choose the right source, understand what conversion does, and learn how to check, scale and export your drawing.
01 / Start here
How does floor plan conversion work?
Blom Convert is browser-based software for designers and project teams working from existing floor plans. Import PNG, JPG or PDF files, review detected wall geometry, edit the drawing and export DXF, SVG or PDF.
- Import. Upload one floor plan and run detection.
- Review. Compare walls and junctions with the source overlay. Correct geometry and accept, skip or manually add doors and windows.
- Scale. Calibrate against a known distance on the drawing.
- Export. Take DXF into CAD, or use SVG and PDF for sharing and further work.
02 / Conversion types
Raster to CAD: from pixels to wall geometry
A raster plan is an image of a drawing, without editable CAD walls. Blom detects a starting draft from the pixels. This helps when an existing building layout survives only as a scan or image.
Use a flat, high-contrast source. Faint walls, annotations and distortion can produce missing walls or stray geometry. Review the perimeter, interior walls, thickness and junctions against the source.
This is floor plan wall reconstruction, not general-purpose tracing of every mark. Furniture, symbols and annotations do not automatically become a complete CAD drawing. Enlarging a blurry scan cannot restore missing detail.
JPG or PNG to DXF: preparing an image for CAD
Upload the original PNG or JPG floor plan when available. Avoid repeated JPG compression and screenshots that lose fine linework. Crop to one plan while keeping its walls legible.
After detection, correct walls and openings and set a known scale. Without calibration, DXF is unitless: one unit equals one source pixel. A printed dimension label does not calibrate the geometry automatically.
DXF is the CAD exchange output; native DWG export is not promised. Check dimensions again in your destination CAD tool. Logos, room photographs and 3D renders fall outside this floor plan workflow.
PDF floor plans to CAD: scanned versus vector
Scanned PDF
Contains an image of the sheet. Walls are detected from pixels, so source clarity matters and the result usually needs more correction.
Supported vector PDF
Carries drawing geometry that Blom can read directly for supported drawings. Still check curved walls, junctions and fine linework against the source.
A PDF extension alone does not identify its content. Not every vector PDF is supported equally, and neither path guarantees reconstruction of every original CAD object or annotation.
For a multi-page PDF, select the page containing the floor plan. Crop unrelated drawings where needed and work with one plan at a time. Changing a scan's file extension does not recover missing detail.
03 / Practical guide
Which files work best?
Works best: one floor plan per file, a clean digital export or PDF, dark walls on a light background.
Not reliable yet: phone photos of paper, hand sketches, coloured or textured plans, sheets with several drawings (crop to one plan first), and whole-site overviews where the walls are very fine.
Won’t convert: elevations, 3D views, and site or land plots.
You can upload a raster image (PNG or JPG) or a PDF. A few things make a real difference to what the detector can find:
- Even, flat lighting on a photo — avoid glare and shadows crossing the sheet.
- Straight, undistorted linework and the full drawing within the image.
- As much resolution and contrast as you can get — a crisp scan beats a blurry photo.
- One sheet at a time. For a multi-page PDF, pick the specific page with the plan on it.
Scale calibration
Detected geometry starts out in pixel space. To make it measurable, use the scale tool: click two points a known distance apart — a dimension string on the drawing, a door you know the width of, a wall you know the length of — and enter that real-world distance with its unit (inches, feet, millimeters, or meters). DXF coordinates are then scaled from that calibration.
Without calibration, DXF is explicitly unitless: one unit equals one source pixel. SVG and PDF retain the source drawing's preview frame; they are not calibrated print drawings.
Correcting in the editor
Whatever comes out of detection opens directly in a built-in editor. Draw or adjust walls, set the scale, and clean up joints where walls meet — all in the same view as the source image, so you can check the result against it directly. Every change goes through undo/redo.
Treat detection as a draft, not a final answer, especially on a scan rather than a vector PDF.
Exporting
Once the corrected plan looks right, export to DXF for CAD software, SVG for vector graphics tools, or PDF for a shareable static drawing. Exports are checked against basic geometry rules before being produced, so you can tell if something in the plan still needs fixing.
Reviewing your result
Detection is in beta. Software output does not certify existing conditions, code compliance or suitability for construction.
Sheets vary in print quality, drafting style and scan quality. Doors and windows are suggested for you to accept or skip, and some will need adding by hand. Treat the drawing as a draft to correct, and verify dimensions independently before using it for design or construction.